Canon VIXIA HFM50 Quick Manual page 165

4 If necessary, activate and adjust the audio mix balance with the
p >
[Audio Mix] setting.
NOTES
• When you are using a microphone connected to the MIC terminal, the
audio level indicator will be displayed automatically.
• When an external microphone is connected to the camcorder, p
> [Auto Wind Screen] will automatically be set to [j Off à].
• If the audio level is too high and the sound gets distorted, adjust the
audio recording level manually (
attenuator with the p
• When using the optional SM-V1 Surround Microphone:
- Change the microphone's directionality mode with the p
[Surround Mic Directionality] setting.
- If the sound gets distorted, activate the microphone attenuator with
the p >
- You can enjoy the full effect of recordings made with 5.1ch surround
sound on HDTVs compatible with 5.1ch surround sound connected
to the camcorder using the supplied HDMI cable. Audio output from
the AV OUT/× terminal (including headphone output) will be
converted to 2ch stereo. The camcorder's built-in speaker is
monaural.
>
[Microphone Attenuator] setting.
[Surround Mic Attenuator] setting.
118) or activate the microphone
A
>
125
Video