Mercedes-Benz S350 TURBODIESEL Operator's Manual page 104

Replacing bulb
When replacing halogen bulbs do not
touch glass portion of bulb with bare
hands. Use plain paper or a clean cloth.
Warning!
Halogen lamps contain pressurized
gas. A bulb can explode if you:
• touch or move it when hot,
• drop the bulb,
• scratch the bulb.
Bulb for high and low beam
HB2 (60/55 W)
Bulb for fog lamp
YC (H3) (55 W)
Remove coyer above headlamp. Move
retaining clamps (5) aside and remove
cover. Pull off electrical connector (8)
respectively (9). Unhook clamping ring
and pull out bulb together with
clamping ring. Remove bulb.
Insert new bulb (seating properly in
cutouts of bulb socket), mount
clamping ring. Reinstall and push
electrical connector on securely.
Reinstall cover and fasten with
retaining clamps (5).
Reinstall cover above headlamp, and
check lamp for proper operation
Turn Signal, Parking, Side Marker
and Standing Lamp
(1157 [26.9/8.3 W/32/3 cp] bulb)
Squeeze latch (5) together and lift
complete lamp assembly out to front of
vehicle. Twist bulb socket (6)
counterclockwise and pull out. Push
bulb into socket, turn counterclockwise
and remove.
Insert new bulb in socket and twist
clockwise. Reinstall bulb socket.
Reinstall lamp assembly until properly
seated and fasten latch (5).
104