Rogers High Definition Set Top Box User Manual

HDMI Cable Connection: This connection uses an HDMI cable, provided by Rogers.
A
Connect the end of the Coaxial cable coming from your wall to the
CABLE IN port. Connect one end of the HDMI cable to the HDMI port.
Note: Be sure to securely fi nger tighten all cable connections. Note : Be sure to securely fi nger tighten all cable connections.
B
Connect one end of the power cord to the
back of the Digital Set Top Box and the other
end to the wall outlet.
Note: To ensure the Digital Set Top Box remains Note : To ensure the Digital Set Top Box remains
authorized and updated, keep the power cord authorized and updated, keep the power cord
and Coaxial cable connected at all times. and Coaxial cable connected at all times.
Turn your HDTV on and set it to the input used in Step 3.
Most TVs can be Most TVs can be
connected to multiple video connected to multiple video
sources like DVD players and sources like DVD players and
VCRs. To view programming VCRs. To view programming
from your Digital Set Top Box, your from your Digital Set Top Box, your
HDTV must be set to the HDMI HDTV must be set to the HDMI
input you selected in Step 3 input you selected in Step 3.
Change your HDTV input by pressing Change your HDTV input by pressing
the the Input Input or or Source Source button on your TV button on your TV
or by using your TV's TV's remote control remote control.
or by using your
C
In addition to operating the Digital Set Top Box, the Rogers remote is capable of controlling basic commands on your TV, DVD, and other devices. To enable these
features, the Rogers remote must be programmed for your particular home entertainment components.
First, program the Rogers remote for your TV.
Since the Rogers remote control is a universal remote, you can
program it for other components by repeating the steps and
substituting the TV button with the respective device button (VCR,
DVD, etc.).
1. Turn your TV on.
2. Press the TV button.
3. Press and hold SETUP
fl ashes twice.
4. Press 9 - 9 - 1, the TV button fl ashes twice.
5. Point the remote towards your TV and press
PWR.
6. Repeatedly press and release the
button until your TV turns off. The remote
will cycle through all possible codes until a
match is found.
Note: You may need to press the
button dozens of times before fi nding a
match.
7. Once the TV turns off, press the
button to lock the code. The TV button will
fl ash twice.
8. Confi rm the correct code was locked by
pressing the PWR button to turn on your TV.
What if this did not work?
Your remote also came with a small user guide that contains specifi c
instructions for programming popular components. Consult the user
guide for futher instructions.
High Defi nition
Easy Installation Guide
Installing your Rogers Digital Set Top Box is as easy as A - B - C.
A: Connect The Digital Set Top Box To Your TV
B: Authorize The Digital Set Top Box
C: Program Your Rogers Remote And Additional Options

Connect The Digital Set Top Box To Your TV

Authorize The Digital Set Top Box

With your TV turned off, press
the
remote.

Program Your Rogers Remote And Additional Options

until the TV button
CH+
CH+
SETUP
Connect the other end of the HDMI cable to the HDMI port on the back
of your HDTV.
From Digital From Digital
Set Top Box Set Top Box
CBL then PWR buttons on the Rogers
D
ON DEMAND
Note:
Your Rogers
remote
cannot be
used to
change
the HDTV
input until
it has been
programmed.
Next, set your Rogers remote to control the volume.*
By default, the Rogers remote is programmed to raise and lower the
volume of the Digital Set Top Box. These steps will set the remote to
use your TV to control the volume instead.*
D
ON DEMAND
TIP: For the best audio control, ensure your volume is set to Fixed in
the audio settings menu. Make sure you set the volume to maximum
on the Digital Set Top Box.
* Not compatible with older TVs with manual volume control.
Are you installing the Digital Set
Top Box yourself?
Yes Yes: Continue to : Continue to Step 2
No: A No : A technician technician installed it, go to
Section C Section C below. below.
Wait for the time to appear on the Digital Set
Top Box.
Confi rm the Digital Set Top Box is authorized.
1. 1. Turn on the Digital Set Top Box by pressing Turn on the Digital Set Top Box by pressing PWR
on the Rogers remote. on the Rogers remote.
2. 2. Change the channel to 3 by pressing Change the channel to 3 by pressing 0
your Rogers remote. your Rogers remote.
Is Channel 03 being displayed? Is Channel 03 being displayed?
Yes: Continue to Yes : Continue to Section C Section C on the reverse of this
guide. guide.
No: Channel 03 is "Not Authorized". No : Channel 03 is "Not Authorized".
Call 1 866 894 9962 Call 1 866 894 9962 to have the Digital Set Top to have the Digital Set Top
Box authorized. You will be asked for the phone Box authorized. You will be asked for the phone
number associated with your account. number associated with your account.
CBL
1. Press the button.
SETUP
2. Press and hold until the
fl ashes twice.
9 9 - 3, the CBL
3. Press - button fl ashes twice.
TV CBL
4. Press the button. The button will
blink twice to confi rm a valid selection.
5. Check that your changes were accepted by
testing the volume controls on the remote.
6. If you see the Digital Set Top Box volume
bar instead of your TV volume bar, your
changes were not successful. Repeat these
instructions beginning at Step 1.
Step 2.
installed it, go to
Note: Note:
Remember Remember
the name of the name of
the HDMI the HDMI
port you port you
selected, ex. selected, ex.
HDMI 1 or or HDMI 1
HDMI 2. You HDMI 2
. You
will need this will need this
in in Step 7 Step 7.
PWR
0 - - 0 0 - - 3 3 on on
on the reverse of this
CBL
button