Kenwood TS-820S Instruction Manual page 35

MOUNTING THE DIGITAL DISPLAY IDG-1A)
ITS-820 TYPE ONLY)
(See Fig. 27)
DG-1 is provided with the following 3 units:
Display Unit
5V AVA Unit
Counter Ass'y Unit
1 Mount the above 3 units in place in the set using screws
(Fig 27(a))
2 Insert the connector 'and the wiring is completed.
3 Calibrate the standard frequency of the counter ass'y
unit by WWV (refer to paragraph 6.3).
For detailed method of mounting, refer to the instruc-
tion manual of DG-1 A.
r
Fig. 27 (d)
35