Radio Shack TRS-80 Model II Reference Manual page 116

MODEL II TRSDOS
Prompting Messages
Here are the prompting messages that may be displ~yed (depending on the options
given in the
BACKUP
command):
Source drive number? (0-3) ..
Type in the number of the drive that will contain the source diskette and press
(ENTER).
Destination drive number? (0-3) ..
Type in the number of the drive that will contain the destination diskette and press
(ENTER).
Source diskette ready? (Y/O) ..
When the source diskette is in the proper drive, type Y (ENTER). To cancel the
backup operation, type
Q (ENTER).
DESTINATION Disk Ready? (Y/O) ..
When the destination diskette is in the proper drive, type Y (ENTER). To cancel the
backup operation, type Q (ENTER).
Diskette contains DATA- use it? (Y/O) ..
This warning will be given only if the
ABS
option is omitted and the destination
diskette contains file data. If you wish to overwrite existing information, type Y
(ENTER). To cancel
BACKUP,
type Q (ENTER).
Change Diskette Information?
This prompt will only be given if you do not use the
ABS
option. Type Y (ENTER) if
you wish to change the password or diskette name on the destination diskette. Type
N (ENTER) if you wish to copy this information from the source diskette.
If you selected the Change option,
TRSDOS
will prompt you as follows:
Enter New Password .
Type in the password to be assigned to the destination diskette and press (ENTER).
Enter New Disk Name .
Type in the diskette name to be assigned to the destination diskette and press
(ENTER).
If you selected the
PROMPT
option, the following prompt will be displayed before
each user file is copied:
file? (Y/N/S) ..
file indicates the current file. To copy it, type Y (ENTER). To skip it, type N (ENTER).
To copy it and stop the prompts, type S (ENTER).
152