Trouble Shooting Guide; Self Check - Panasonic TH-42PHW6EX Service Manual

Hide thumbs Also See for TH-42PHW6EX:

Table of Contents

TH-42PHW6EX / TH-42PHD6EX / TH-42PHD6BX / TH-42PHD6UY

11 Trouble shooting guide

11.1.1. Display Indication

1. Self-check is used to automatically check the bus line

controlled circuit of the Plasma display.

2. To get into the Self-check mode, press the volume down

button on the customer controls at the front of the set, at the

same time pressing the OFF-TIMER button on the remote

control, and the screen will show :-

If the CCU ports have been checked and found to be incorrect

Or not located then " - - " will appear in place of " OK "

11.1.2. Power LED Blinking timing chart

Information of LED Flashing timing chart.

When an abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the

defective block can be identified by the number of blinkes of the Power LED on the front panel of the unit.

Above Fan function is operated during the fans are installed.

Table of Contents

Th-42phd6bx Th-42phd6uy Th-42phd6ex