Trouble Shooting Guide; Self Check - Panasonic TH-32LHD7UY Service Manual

Hide thumbs Also See for TH-32LHD7UY:

Table of Contents

11 Trouble shooting guide

11.1.1. Display Indication

1. Self-check is used to automatically check the bus line

controlled circuit of the LCD display.

2. To get into the Self-check mode, press the volume down

button on the customer controls at the front of the set, at the

same time pressing the OFF-TIMER button on the remote

control, and the screen will show :-

If the CCU ports have been checked and found to be

incorrect

Or not located then " - - " will appear in place of " OK "

3. If you want to exit this mode, press stand by button on the

remote control or press the Main Power on/off switch at the

11.1.2. Power LED Blinking timing chart

1. Subject

Information of LED Blinking timing chart.

2. Contents

When an abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the

defective block can be identified by the number of blinkes of the Power LED on the front panel of the unit.

3. Remarks

Above Fan function is operated during the fans are installed.

TH-32LHD7UY / TH-32LHD7UXK / TH-32LHD7UXS / TH-32LHD7EK / TH-32LHD7ES / TH-32LHD7BK / TH-32LHD7BS

All manuals and user guides at all-guides.com

front of the set.

Table of Contents