Buttons, Connectors And Indicators - JVC HR-5911U Instructions Manual

Buttons, Connectors and
Indicators
Front Panel
loading slot
POWER
S-VIDEO
S-VIDEO VIDEO/AUDIO input
input
connectors
connector
Display panel Timer mode indicator
Play indicator
Record indicator
Channel and auxiliary input/Clock time
Rear Panel
AC power cord
Cassette
24HR QUICK
REC LINK PROGRAM
INSERT A.DUB
Remote
sensor
VCR mode
indicator
S-VHS
indicator
Remote
Number keys
Advanced
JOG dial
REW FF
The glow-in-the-dark buttons shown in white on the illustration
above are helpful when using the Remote in darkened rooms.
On-screen display
If you press OSD (OK) on the Remote when "SUPERIMPOSE" is
set to "ON" (
S-VIDEO
TV screen.
The indications are not recorded even if the VCR is in the
recording mode.
Channel and
auxiliary input
Day and
clock time
STEREO
program
indication
SAP
indication
Audio
monitor
indications
To recall an indication
A Press OSD (OK).
All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and RECORD/PAUSE if in the Record Pause
mode, remain on the TV screen.
B Press OSD (OK) again to clear the display.
The RECORD/PAUSE indication remains on the TV screen.
— 4 —
pg. 15), you can see the current VCR status on the
Timer warning display
Time counter
VCR operation
mode
Tape speed
Cassette mark
Tape position
Index number
Tape
remaining time