Nakamichi dealer. Reset When you purchase external components, check with your Nakamichi dealer to make sure that they work with your model and If this unit fails to operate properly, press the reset button. in your area. The unit returns to factory settings when the reset button is pressed.
Disc and Format Supports Disc Maintenance This unit can play various video/audio format which stored into Disc / USB on Media Player. Before playing, wipe the disc using a clean cloth, working from the center hole towards the outside edge. Never use benzene, thinners, The following chart helps you to check if a Disc is supported by this unit, cleaning fluids or anti-static liquids or any other solvent.
Insulate unconnected wires with vinyl tape or other similar material. To safety’s sake, leave this work to professionals. prevent a short circuit, do not remove the caps on the ends of the If you experience problems during installation, consult your Nakamichi unconnected wires or the terminals. dealer.
Installing the unit Bend the appropriate Sleeve tabs to hold the sleeve firmly in place. Trim plate Control panel Before attaching, make sure the direction of the escutcheon is correct. (Wider hooks on the Screw (Not Included In This Packing ) bottom side.) Dashboard Sleeve...
Basic Operation Loading slot Encoder Volume Knob Ejects the disc XBASS DBSS BAND MENU SUB-W AUX IN Detaches the Power / Mute Display window Push open the cover control panel USB terminal Aux-In jack When you press or hold the following button(s)... Main unit General operation Select the available sources , if the power is turned on.
Function Settings 1 Press MENU to access into the [AUDIO MENU] mode, press and hold to enter into the [MENU] mode. 2 Press repeatedly to select the item to be adjusted. 3 Turn the encoder volume knob to select a value / option. [AUDIO MENU]...
Listening to the Radio DBSS XBASS BAND MENU SUB-W AUX IN Hold for about 2 seconds to memorize the current station . ■ Press briefly to recall memorized station. ■ 1 Press BAND repeatedly to a band ( FM1, FM2, FM3, AM1(MW1) or AM2 (MW2) .
Play media files Detaches the control panel Press to select a track / file. Press to adjust different ■ random mode(Disc/USB only). Press and hold for fast forward / backward. ■ Ejects the disc DBSS XBASS BAND MENU SUB-W AUX IN Press into search mode Press to pause.
Listening to the other external components Auxiliary input jack MOSFET 4x50W DBSS XBASS BAND MENU SUB-W AUX IN 1 Press the to select AUX-IN mode. 2 Turn on the external component and start playing. 3.5 mm Cable (not included) 10 EN...
Remote Control Operation SOURCE VOLUME BAND XBASS DBSS DISP AUDIO MENU TITLE TITLE GOTO ZOOM ANGLE SETUP When you press or hold the following button(s)... Under media playback mode use these numeric for track Item General operation or file number direct access and use when function need Press turn the unit on or off.
Product Information General Power Supply: 12V DC (10.5-14.4V), negative ground Fuse: 15A Suitable Speaker Impedance: 4 -8 Aux-In level: 500mV Disc player System: DVD/CD audio /MP3 system Frequency Response: 20Hz to 20KHz +/-3dB Signal to Nosie Ratio: >90dB Channel Separation: 2 Channel(Stereo)>60dB@1KHz Video signal format: NTSC/PAL Video Output: 1+/- 0.2V Audio Section...
Need help?
Do you have a question about the NA400 and is the answer not in the manual?
Questions and answers