Related Manuals for Bona MiniEdge
Summary of Contents for Bona MiniEdge
- Page 1 Bona MiniEdge Manual and safety instructions in original AMO260000.3 | AMO260001.0 | AMO260001.3 | AMO260003.3 Translation of manual in originals v1.1...
-
Page 2: Technical Data
Carefully read through the entire user manual before you begin working with the machine. If anything is unclear, turn to your reseller with confidence or to Bona Safety instructions Read through the safety instructions carefully and inform your employees and users, so no one comes to harm when using the machine. - Page 3 Bona MiniEdge DANGER means that you or other staff can suffer a serious injury or death if THE INSTRUCTIONS MARKED WITH DANGER ON THIS MACHINE OR IN THESE USER INSTRUCTIONS are ignored or are not followed. Read the entire user manual before you use the machine.
- Page 4 Because of this construction is in many ways unique use of other spare parts and accessories than Bona original spare parts can cause a risk of personal injury and/or damage to the machine. Ensure that the machine is always in good condition. Keep the machine clean for better and safer use.
- Page 5 Service and repairs must be performed by Bona or retailers authorised by Bona. Be aware when you work. Use common sense. Do not use the machine if you are tired, have consumed alcohol or have taken medication that can affect your judgement or your body control.
- Page 6 The machine may never be cleaned using a high pressure washer or hose. Spare parts and exploded views On the Internet, you will find a list of spare parts and exploded views for Bona MiniEdge and other machines in our product range.
- Page 7 During the factory warranty period, service or repairs may only be carried out upon approval by a manager at Bona Division Sanding and only performed by staff at Bona AB or approved staff at Bona AB Division Sanding.
-
Page 8: Switching On The Motor
STARTING Before starting the machine, instructions should be obtained from your dealer or Bona . Never touch neither the sanding disc nor the sanding plate when the power cable is plugged in. For security reasons, the extension cable must be unplugged from the motor cable when the machine is not used. - Page 9 Bona MiniEdge Machine adjustment (Pict. 4-5) The machine is designed to angled forwards with an angle of approx. 4°. The distance between the underside of the motor bracket and the floor should be 58 mm. This is achieved by adjusting the wheels using the adjusting screws.
- Page 10 Dust collection For minimum dust discharge Bona ’s original dust bag must be used. The dust bag shall be emptied when it is 1/3 full. When emptying the dust bag, remove the dust tube together with the dust bag completely, open the zipper and empty the contents.
- Page 11 Bona MiniEdge SERVICE AND MAINTENANCE All maintenance must be made on an unconnected machine Check that the cable keeps an area of at least (120V 3xAWG14 Article no: ASO901527) or (230V 3 x 1,5mm2 Article no: ASO908215). If the cable is too weak the motor can be overloaded and be damaged.
- Page 12 Bona MiniEdge Reassembly (Pict. 15 -18) Distance of gap Line-up the holes consistently Place the new belt on the belt pulley. Twist the Bearing house while holding the pulley in such way that the distance between the bearing housing and the pulley is the biggest and the holes line up consistently.
- Page 13 Bona MiniEdge Carbon brushes (Pict. 20-22) The task of the carbon brushes is to transport the power to the armature via the rotating collector. There are two carbon brushes. They should be checked regularly and changed in pairs after approx. 100 hours normal operating time.
- Page 14 Bona MiniEdge Changing wheel bracket, complete wheel (Pict. 25) When you wish to change complete wheel do as follows: Insert the Allen key in the key in the socket on the shaft, use a universal pliers and pull the wheel adjusting anti-clockwise. Loosen the wheel locking completely and unscrew the wheel nut from the motor bracket.
- Page 15 Bona MiniEdge Trouble shooting Fault Cause Action The machine doesn’t start No power. Change to another wall socket. Cable broken. Change the cable. Rotation of the disc is impossible Rotate the sanding disc, remove possible blockages. Check that the ventilator runs smoothly.
- Page 16 Bona MiniEdge SAFETY INSTRUCTIONS FOR USE OF BONA EDGE MACHINES IMPORTANT! During use of electrical machinery, basic safety precautions should be followed in order to reduce the risk of fire, electrical accidents or personal injury. Therefore, read the following instructions thoroughly before the machine is used. Save the instructions. Always use an earth circuit breaker! 1.
- Page 17 Bona MiniEdge division Sanding Vallgatan 45, SE-716 31 Fjugesta, Sweden Tel.: +46 (0)40 38 73 90 Fax: +46 (0)585 204 Please visit: www.bona.com/compliance for more information about the Waste Electrical and Electronic Equipment...
- Page 18 EU assurance of conformity As per directive 2006/42/EC, appendix IIA We hereby guarantee that Bona MiniEdge with article number: AMO260000.3 | AMO260001.0 | AMO260001.3 | AMO260003.3 beginning from serial number 1001AMO260001 fulfils the requirements in the Council’s directives: ...
Need help?
Do you have a question about the MiniEdge and is the answer not in the manual?
Questions and answers