Factory Preset Of Mode Settings; System Resetting Method - JVC RK-LP55U Instructions Manual

FACTORY PRESET OF MODE SETTINGS

●
The default values (factory preset) for each of the RM-LP55's modes are shown below.
Mode
CAM MODE
CONTOUR
CONTOUR LEVEL
SC COARSE
SC FINE
H.PHASE
GAMMA
IRIS DETECT
TITLE
TITLE POSITION
Any setting data which is currently displayed on the LCD can be reset to the default value (shown in
the table above) by pressing the FUNC1
simultaneously.
You can also simultaneously reset all settings to the default values as described in the next section.

System resetting method

●
While pressing the MENU
simultaneously, set the OPERATE switch to
ON.
ASYSTEM RESETB appears on the display,
●
then the unit returns to its normal operating
state.
SYSTEM RESET
● System resetting does not affect scene files
(A and B) or current camera settings.
AUTO IRIS LEVEL, ALC IRIS SET and
●
CAMERA TYPE settings cannot be reset by
the system resetting, (AREMOTE
CONTROLLER OPERATION MODE
SETTINGSB (A pg. 18)).
While pressing these
simultaneously, set
OPERATE to ON.
E-20
Factory preset
CAM
ON
0
0°
0
0
ON
NORMAL
OFF
1
and
buttons B
and
MENU
Mode
RANDOM TRIGGER
HI-RESO
SHUTTER
V.SCAN
SLOW
GAIN MODE
WHITE BALANCE
PAINT
-
buttons C or the FUNC2
Factory preset
OFF
OFF
NORMAL
1/60.0 (U-ver.)
1/50.0 (E-ver.)
1 FRM
0 dB
AUTO1
OFF
-
buttons D
and