JVC RK-LP55U Instructions Manual page 17

Reading data from SCENE FILE
1.
Press FILE button F.
● The AFILEB screen will appear on the LCD.
Press FILE button.
2.
Press FUNC1 button C to select either
SCENE A or SCENE B.
FILE
SCENE A READ
Select either the ASCENE AB
or ASCENE BB.
3.
Press FUNC2 button D to select AREADB.
Press to set to AREADB.
4.
Press ENTER/SET button E.
The display changes to ASCENE FILE A (or B)
●
READ OK?B.
SCENE FILE A
READ
5.
Press ENTER/SET button E again if it's OK.
● The LCD changes to ASCENE FILE A (or B)
READING!B. The stored data is read out to the
camera.
SCENE FILE A
READING!
If you don't want to execute reading, press
●
MENU button B to cancel.
NOTE:
The following data cannot be stored in the Scene
File. Reset the data as necessary after the Scene
File reading.
●
Position and speed of zoom/focus
●
White balance data set by auto white balance
adjustment
●
Title data
o CAMERA SETUP FUNCTION
●
FILE
NOTE:
When connecting to KY-F55/KY-F55B/KY-F32/
KY-F50*, the settings on the camera unit are
required if the setup status is to be maintained on
the camera. (Refer to the camera's instructions for
details.)
(*E Model).
1.
FUNC1
2.
FUNC2
OK?
3.
4.
To transfer the data set with the remote control
to the camera. The data remains in the camera
even when the remote control is disconnected.
(Use this function to set up the camera.)
Press FILE button F.
● The AFILEB screen will appear on the LCD.
Press FILE button.
Press FUNC1 button C to select ARM DATA
TO CAMB.
It will not be displayed if the setup feature is not
●
available on the camera.
FILE
RM DATA TO CAM
Press to select ARM DATA
TO CAMB.
Press ENTER/SET button E.
The display changes to ARM DATA TO CAM
●
SAVE OK?B.
RM DATA TO CAM
SAVE
Press ENTER/SET button E again if it's OK.
● The LCD panel displays ARM DATA TO CAM
SAVING!B. The setting data is stored in
camera's memory.
RM DATA TO CAM
SAVING!
● If you don't want to execute saving, press
MENU button B to cancel.
FILE
FUNC1
OK?
E-17