Advertisement
Quick Links
1. Description
This installation guide provides detailed information and instructions for the Edge network DVR
products. The Edge offers the remote live and playback function as a recording server.
•
Front View
•
Right Side View
Sata hard disc drive
Edge , Quick Installation Guide
Power On/Standby button
Power On/Standby button
Power LED : See ** below
REC LED : Emitting during recording
Network LED : Emitting when Ethernet cable connected
Network LED : Emitting when Ethernet cable connected
** Power status
Red : Standby state
Orange : In booting progress
Green : Normal state
Extra Sata connector : To expand hard disc drive
adding to installed drive inside
Advertisement
Related Manuals for Edge NVR
Summary of Contents for Edge NVR
- Page 1 Edge , Quick Installation Guide 1. Description This installation guide provides detailed information and instructions for the Edge network DVR products. The Edge offers the remote live and playback function as a recording server. • Front View Power On/Standby button...
- Page 2 • Rear View WiFi Antennas - 2.4GHz and 5GHz wireless antennas ** Only available for Edge 8 Ports Sensor Input - NC/NO Devices selectable - TTL Level Input 8 Ports Alarm Output - NO Devices - DC 30V 1A max - AC 125V 0.5A max...
-
Page 3: Installation
PC, while a direct cable is used for connection to a hub. The following picture is an example of a network diagram using Edge. The network port on the product back panel is for both client computer and cameras. The rear panel network port can be used for devices within the same network, or in different networks as shown in the example diagram. - Page 4 • Connecting the Power Connect the DC power adaptor to the NVR. As the power is supplied, the Power LED will start flickering, indicating stand-by mode. Pressing the POWER button will turn the power on and the Power LED will light.
- Page 5 • Factory Reset The NVR has a Factory Reset button on the rear panel. This button will only be used on the rare occasions that you want to return all the settings to the original factory settings. To reset the unit, you will need to follow steps: 1.
- Page 6 Edge, Quick Installation Guide 2. Multi-location Configuration. Case 1 Local Site 1 Internet Client PC Local Site 2 Internet Case 2 Internet Client PC Internet...
-
Page 7: Network Connection And Ip Assignment
Select the NVR on the list and click right button of the mouse. You can see the pop-up menu as below. Select Assign IP. You can see an assign IP window. Enter the required IP address. -
Page 8: Connecting To The Website
2.3 Connecting to the Website The Network Video Recorder supports the operation through the network. When the NVR is first connected to the network, it has no IP address. So, it is necessary to allocate an IP address to the device with the “Smart Manager”... - Page 9 Edge, Quick Installation Guide [Step2] Easy Installation makes the NVR detect ONVIF based all of network cameras and register automatically. Change the admin password or use the default password (admin) of cameras to be detected. If you don’t want to use Easy Install function, inactivate checkbox. In case that you activated Easy Installation, you don’t need to do Step3.
- Page 10 Edge, Quick Installation Guide [Step3] The NVR detects all of IP cameras connected in the intranet and displays in the camera list. Click the Search Cameras button and the Camera Discovery window appears. Select one of three in Search Mode and click the Start Search button.
- Page 11 Edge, Quick Installation Guide All cameras detected are displayed in the list. Display the name and IP address the selected camera. The name will be updated automatically depending on the settings of the network camera. Select one or several cameras from the list and click the Register button to register. The Login window appears and inquires ID and Password.
- Page 12 Edge, Quick Installation Guide The NVR displays the registered camera list in the Camera Registration window. When you select a camera channel in the list, the basic information for that camera is displayed in Camera Information section. Configure camera settings you want to change. Click the Save button to...
- Page 13 Edge, Quick Installation Guide If you want to configure more detail information for a selected camera, click the Onvif Setup button in the Setup Wizard window. You can configure camera settings about Profile, Video, Audio, and Network. [Step4] The list of available hard disk drives is displayed with the information of the hard disk drives. Select a hard disk drive from the list and click the Format button.
- Page 14 Edge, Quick Installation Guide When you click the Format button, the NVR ask you to set the storage to record or archive device. If the storage is formatted to archiving device, it can be used as a record storage. Note: Archive records a video to the record storage and copies it to the archive storage at the same time.
Need help?
Do you have a question about the NVR and is the answer not in the manual?
Questions and answers