Advertisement
Table of Contents
BUNN
1.5 GALLON
®
THERMAL SERVER
On this card you will find directions for operating, cleaning and repairing minor problems you may
have with your Thermal Server. By regularly cleaning your servers and using the trouble shooting
guide you will ensure consistent quality in the cup with little or no downtime.
Instructions:
Always pre-heat server(s) with hot water for at least 10 minutes before using.
Rinse inside of server between each batch. Or at the end of the day run a batch into server
without coffee and close lid and server is ready to go the next morning.
1
2
3
Insert stem with brew through lid into
server and twist to tighten.
Screw lid to the left to remove brew
through lid from brew through spout.
After brew is complete put on lid and twist
to the right to tighten to transport and or
retain heat.
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for STARBUCKS BUNN
- Page 1 BUNN 1.5 GALLON ® THERMAL SERVER On this card you will find directions for operating, cleaning and repairing minor problems you may have with your Thermal Server. By regularly cleaning your servers and using the trouble shooting guide you will ensure consistent quality in the cup with little or no downtime.
- Page 2 Coffee remains in server more than Use coffee within 2 hours 2 hours Coffee is not visible in Vent on top of sight glass is closed Open vent sight glass, server is full © 2012 Starbucks Coffee Company. All Rights Reserved. SFS-007-WPS-ECD-00625...
Need help?
Do you have a question about the BUNN and is the answer not in the manual?
Questions and answers