BMW K 1600 GTL Rider's Manual page 48

4
46
Selecting from a list:
A circle 2 beside each selectable
item means that the items are
z
part of a selection list. A circle
with a dot indicates the item that
is currently selected.
If you want to change the se-
lection, move the cursor to an-
other item in the list and press
the Multi-Controller to the right
to either activate or deactivate
the parameter you selected.
Setting numerical values:
If there are one or more numeri-
cal values between the arrows 3,
you can increase the values by
turning the Multi-Controller up
or reduce the values by turning
it down. By pressing the Multi-
Controller to the right or left, you
can change between the values.
Setting relative values:
A bar indicator enables you to
set a value in a range between
two limits. Turning the Multi-
Controller up increases or turning
it down decreases the value to
be set.