Clifford AvantGuard 4 Installation Instructions Manual page 24

Test 5: Leave the engine running. It should turn itself off after 30 minutes.
If the IntelliStart 4 remote engine starter does not pass any of the above tests, verify all wiring connections and retest the system
thoroughly.
FOR ALL MAN UAL TRANS MIS SIONS, PER FORM THE FOL LOW ING STEPS:
1) Start the car us ing the ig ni tion key.
2) Set the emer gency brake.
3) Set the heat or AC to ON.
4) MAKE SURE THE CAR IS IN NEU TRAL.
5) Trans mit the man ual trans mis sion en able func tion by pressing button 11 on the master re mote con trol.
6) Turn the key OFF and exit. The car stays run ning.
7) Close all doors, arm the alarm. The en gine stops run ning. You are now in man ual trans mis sion mode.
8) Pro vided the doors are never opened or the alarm is not trig gered, the re mote start func tion will start the ve hi cle's en gine. If a door
is opened or if the alarm is triggered, manual transmission mode is canceled.
9) Press button 4 on the master remote or the
Step 21.
Dis trib ute all nec es sary pa per work in clud ing:
n User's Manual must be given to the customer.
Wireless Immobilizer Location Record.
n
One copy is for your records.
o
One copy is for the customer.
o
Adhere the Clifford window decals to the vehicle's windows.
n
Step 22.
Dem on strate Ba sic Sys tem Operation
Remote Operations:
n
Arming/disarming and locking/unlocking
o
Panic Feature
o
Headlight Operation
o
Proximity Sensor Override
o
Engine Starting
o
Window RollUp and Window RollUp Bypass
n
AutoArming and AutoArming Bypass
n
n Immobilization
n Valet code entry
User-programming mode
n
Accessory operation
n
24
button on the companion remote to start the engine.
Avant Guard 4/699