Table of Contents
Advertisement
USB Memory Drive
NOTE: If you are running the Windows
you must install the driver software BEFORE connecting the
USB Memory Drive to your computer. To do this, see
"Installing the Driver Software" below.
Connecting the Drive to Your Computer
To connect the drive to your computer:
1
Turn off your computer (if it's turned on).
2
Remove the USB connector cover.
3
Plug the standard USB end of the drive into an available
USB port on your computer.
Installing the Driver Software
If you are running the Windows
system, the default device drivers are automatically installed
and no additional driver installation is required.
Windows
98/98SE Operating Systems
®
1
Insert the driver software CD-ROM into your
computer's CD-ROM drive.
2
Click Start, Run, then enter D:\Win98\Setup.exe (where
D: is the path of your CD-ROM drive) and click OK.
3
To complete installation, follow the on-screen
procedures.
®
98 operating system,
Me/2000/XP operating
®
4
Advertisement
Table of Contents
