Table of Contents
Advertisement
6
COMMISSIONING THE SYSTEM
6.1 Completion Checklist for Installation
1
Check ST9120C has powered up correctly and the display is not blank. Now set the operating mode to AUTO.
2
Check DT92E has powered up correctly and the display is not blank.
Configure DT92E as required (see Section 4 for how to do this). Remember to make a note of any changes in the
3
Configuration Data section of the User Guide.
Change the temperature setpoint on DT92E to 35°C by pressing the
4
button for 2 seconds to take it back to run mode).
Now go to ST9120C. With the operating mode set to AUTO, switch on and off using the OVERRIDE button, to ensure the
5
system is operating correctly.
6
Check the factory-set day, date, and time are correct and adjust if necessary. Refer to User Guide for details.
If required, enter Installer Setup Mode and adjust Installer Parameters to match the lifestyle and needs of the User.
7
Remember to make a note of these parameter changes in the Configuration Data section of the User Guide.
8
If required, enter Set Service Mode and enable the Boiler Service Reminder, and set the appropriate Service parameters.
9
Set the DT92E to the temperature required by the User (20°C is recommended).
Explain the operation of the products to the User, and help them to set their programme. ST9120C has 3 built-in profiles
10
that can be used as a basis for typical User programmes.
Explain when the User should contact someone to arrange a Service Visit, and what you have programmed to happen
11
when the Service is overdue.
If required, attach the self-adhesive programme guide label to the underside of the ST9120C cover flap. The label is
12
supplied in the box and requires to be peeled away from the backing material before use.
Write the date of installation, your name and telephone number in the space provided in the User Guide, in the section
13
'Boiler & System Service Log'.
Remember to leave the User Guide and Installation Instructions with the User and remind them to keep them in a safe
14
place. This forms part of a Home Information Pack.
This product and its associated documentation and packaging are protected by various intellectual property rights belonging to Honeywell
Inc and its subsidiaries and existing under the laws of the UK and other countries. These intellectual and property rights may include patent
applications, registered designs, unregistered designs, registered trade marks, unregistered trade marks and copyrights.
Honeywell reserves the right to modify this document, product and functionality without notice. This document replaces any previously issued
instructions and is only applicable to the product(s) described.
This product has been designed for applications as described within this document. For use outside of the scope as described herein, refer to
Honeywell for guidance. Honeywell cannot be held responsible for misapplication of the product(s) described within this document.
Manufactured for and on behalf of the Environmental and Combustion Controls Division of Honeywell Technologies Sàrl, ACS-ECC EMEA, Z.A. La
Pièce 16, 1180 Rolle, Switzerland, by its Authorised Representative Honeywell Inc.
Honeywell Control Systems Ltd.
Arlington Business Park,
Bracknell, Berkshire
RG12 1EB
Technical Help Desk: 08457 678999
www.honeywelluk.com
button. (If DT92E is currently off, hold the
50047644-001 A
© 2009 Honeywell International Inc.
16
Hide quick links:
Advertisement
Table of Contents
