Advertisement
PASTA MACHINE ASSEMBLY
1. Position the Pasta Machine Base
on a table or countertop, near the
edge of the work surface.
2. Silde the C-Clamp into the
C-Clamp Hole in the side of the
Pasta Machine Base. The threaded
screw portion of the C-Clamp will be
underneath the table or countertop
(Figure A).
3. Tighten the Thumbscrew on
the C-Clamp to secure the Pasta
Machine to the table or countertop
(Figure B).
4. Align the Clips of the Cutter
Attachment with the Clips on the
Pasta Machine. Slide the Cutter
Attachment onto the Pasta Machine
until fully seated (Figure C).
Figure A
Base
C-Clamp Port
Figure B
C-Clamp
Thumbscrew
Figure C
Cutter Attachment
Clips
-4-
ADDITIONAL ACCESSORIES AVAILABLE
Square Ravioli Attachment (50mm)
Angel Hair Attachment (1mm)
Spaghetti Noodle Attachment (2mm)
Linguini Attachment (3mm)
Lasagna Attachment (50mm wide)
Lasagnette Attachment (12mm wide)
Half Moon Ravioli Attachment (50mm)
Bamboo Pasta Drying Rack
C-Clamp
These products and many more products can be ordered by visiting
Monday thru Friday 8:00am-5:00pm EST. Outside the U.S. call 440-638-3131
Clips
PART
DESCRIPTION
W e s t o n P r o d u c t s . c o m or by calling
Weston Products LLC Toll Free at 1-800-814-4895
E-Mail: CustomerService@WestonProducts.com
-17-
PART
NUMBER
01-0209
01-0202
01-0203
01-0204
01-0206
01-0205
01-0208
53-0201
Advertisement
