Advertisement
Epson PowerLite D6150 /
D6155W / D6250
Selecting an Image Source
If you connected multiple image sources to the projector, such as a computer and DVD player, you may
want to switch from one image source to the other.
1. Make sure the connected image source you want to use is turned on.
2. For video image sources, insert a DVD or other video media and press Play (if necessary).
3. Do one of the following:
• Press the Source Search button on the projector or remote control until you see the image from
the source you want.
• Press the button for the source you want on the remote control. If there is more than
that source, press the button again to select the other source.
1
2
3
4
4. If you see a blank screen or a "No Signal" message, try the following:
• Check that the device cables are securely connected to the projector and the device.
• Make sure the projector is turned on.
• For laptop computers, make sure you have set up your laptop to output its display properly.
Computer port sources
Video and HDMI sources
USB port sources (external devices)
Network source
INSTALLATION HANDBOOK
Remote Control Info
3
Advertisement
