Table of Contents
Related Manuals for IntelliTrac SeniorSafe GPS
Summary of Contents for IntelliTrac SeniorSafe GPS
-
Page 1: User Manual
IntelliTrac SeniorSafe GPS Personal Tracking System User Manual IntelliTrac Technical Support 8.30am-5pm Mon-Friday 1300 767 492 IntelliTrac Australia University Hill Business Park South 11 Scholar Drive, Bundoora, 3083 Victoria Australia... -
Page 2: Device Information
With respect to any damages arising in operation with the described product of this document, IntelliTrac Pty. Ltd. shall be liable to the general terms and conditions on which the delivery of the described product and this document are based. -
Page 3: Kit Contents
1. Kit Contents Upon opening the contents of your IntelliTrac SeniorSafe please ensure the following GPS Tracking Device and accessories have been received. IntelliTrac SeniorSafe Personal Tracking System 240V Plug Pack Charger Car Charger USB Car Charger and Programing Cable ... -
Page 4: Introduction Of Features
2. Introduction of Features The IntelliTrac SeniorSafe combines State Of The Art GPS tracking technology with GSM Digital Mobile Phone GPRS and SMS communications to provide an effective system for monitoring the locations of persons anywhere on the globe where there is GSM Mobile Phone Coverage. -
Page 5: Inserting The Sim Card
3. Charging the SeniorSafe Prior to first use, please charge the IntelliTrac SeniorSafe for 8 hours. Charging is via the Mini USB plug at the bottom of the SeniorSafe. You may charge the device using the included plug pack or car charger. When the SeniorSafe is charging, the battery icon on the LCD screen will flash. - Page 6 5. Turning On The SeniorSafe To the turn SeniorSafe ON and OFF - Press the Power Button continuously for 3 seconds. A startup and shutdown tone will be heard. The following will be displayed on the LCD Screen. Press the Power Button again for 1 second. The LCD Screen display will change Press the Power Button again for 1 second.
-
Page 7: Answering Incoming Calls
These numbers must be pre programmed at the time of purchase. If you require these numbers to be changed please contact IntelliTrac. If a speed dial button is pressed which has not been programmed, the following message will be displayed... - Page 8 10. SOS Emergency Alert Press the SOS Button continously for 5 seconds to send Alerts to the IntelliTrac 24 Hour Response Centre and optionally SMS Alerts to up to 5 pre programmed mobile phone numbers. The following message will be displayed on the receiver’s mobile phone.
- Page 9 Pressing this button will send a predefined message alert such as “Cancel SOS” or “I am not feeling well” to the IntelliTrac 24 Hour Response Centre and optionally SMS Alerts to up to 5 pre programmed mobile phone numbers.
- Page 10 12. Locating the SeniorSafe Using Internet The SeniorSafe may be located by simply logging into the www.intellitrac.com.au Client Login selecting An online web based Software system allows real time tracking, journey replay using graphical map displays and management reporting of the SeniorSafe.
-
Page 11: Adjusting Time Display
14. Voice Tapping the SeniorSafe In cases where the SeniorSafe owner is unable to answer a voice call, you may send an SMS to the SeniorSafe0 and it will return dial your mobile phone, therefore allowing you to listen into potentially dangerous situations. $WP+VWT=0000,XXXXXXXXXX,Y Please note 0000 represents the device password which was nominated at the time of purchase. -
Page 12: Changing Speed Dial Numbers
16. Changing Speed Dial Numbers The SeniorSafe Speed Dial Numbers may be reprogrammed by simply sending the following SMS to the GPS device from your mobile phone. 0000 $WP+QDSET= ,phone number 1,phone number 2,phone number 3, Please note 0000 represents the device password which was nominated at the time of purchase. Where If programming to dial to only from Quick Dial Button 1 If programming to dial from QD Button 1 and 2...
Need help?
Do you have a question about the SeniorSafe GPS and is the answer not in the manual?
Questions and answers