Toshiba SatellitePro L700 Series User Manual page 56

56
Getting Started
Adding memory (optional)
10 Locate an empty memory module slot on the underside of the
computer.
NOTE
NOTE
NOTE
11 Pick up the memory module by its sides, avoiding any contact
with its connector. Position the module toward the socket,
aligning the connector's notch with the matching key in the
socket.
notch
latch
key
(Sample Illustration) Aligning the memory module with the socket
If no memory slot is available, you must remove a module by
performing steps 2-3
If your system has the memory modules stacked on top of one
another, you must remove the top module first before
removing/installing the bottom module.
For this model, Slot A is the bottom slot. Slot B is the top slot. If only
one memory module is to be installed, it must be installed in Slot A.
of "Removing a memory module" on page
connector
latch
59.