Switching the Device On or Off
Once the device has been configured, you will not be
prompted with setup screens again.
1. Press and hold
switches on.
The device searches for your network and after finding
it, you can make or receive calls.
Note: The display language is preset to English at the factory.
To change the language, use the Language menu. For
more information, refer to "Language and Input
Settings" on page 279.
2. Press and hold
options screen appears.
3. Tap Power off (
18
(Power/End) until the device
(Power/End) until the Device
)
OK.
DRAFT
Internal Use Only
Restarting the Device
1. Press and hold
options screen appears.
2. Tap Restart (
)
Locking and Unlocking the Device
By default, the device screen locks when the backlight turns
off.
Place your finger on the screen and swipe the glass in
any of the directions shown unlock the device.
(Power/End) until the Device
OK.