Control 4 Door Station - Interior Setup Manual page 8

Figure 9. 26cm Antenna Kit
Figure 10. 3m Antenna Kit
WiFi Antenna Kit Installation (Optional)
Before you install the antenna:
1 Make sure the Door Station is assembled.
2 Make sure the Door Station back box is installed
in the wall. See the Door Station Back Box
Installation Guide for details.
Antenna Kit—WiFi/ZigBee 2.4GHz, 26cm
(C4-AK-26cm)
1 Remove the antenna from its packaging.
2 Attach the antenna's plug to the RSMA connector
on the Door Station (see Figure 11).
8
Figure 11. Antenna to RSMA Connector
RSMA Connector
3
Thread the other end of the antenna through the
back wall of the back box (see Figure 12).
Figure 12. Thread Antenna Through Back Box
Antenna
4
Leave the other end of the antenna hanging
outside the back box. Adjust it vertically for the
best signal.
5
Carefully insert the Door Station into the back box
(see "Attach the Door Station").
Antenna Kit— WiFi/ZigBee 2.4GHz, 3m (C4-AK-3M)
1 Attach the antenna's plug to the RSMA connector
on the Door Station (see Figure 11).
Antenna