Tuner Operations; Tuning Into Stations Manually; Using Preset Tuning - JVC RX-DV3SL Instructions Manual

Tuner Operations

Tuning into Stations Manually

On the front panel:
1
Press FM/AM to select the band.
The last received station of the selected band is
tuned in.
The CONTROL buttons now work for tuner
operations.
• Each time you press the button, the band alternates between
FM and AM.
ANALOG
SPK.
L R
Ex. : When selecting the FM band
2
Press CONTROL ∞ (or 5)
repeatedly until "< TUNING >"
appears on the display.
ANALOG
SPK.
L R
3
While "< TUNING >" still remains
on the display, press repeatedly or
hold CONTROL 3 (or 2) until you
find the frequency you want.
ANALOG
SPK.
L R
• Pressing (or holding) CONTROL 3 increases the frequencies.
• Pressing (or holding) CONTROL 2 decreases the frequencies.
From the remote control:
1 Press FM/AM.
2 Press repeatedly or hold TUNING 9 or ( until you find the
frequency you want.
• Pressing (or holding) TUNING 9 increases the frequencies.
• Pressing (or holding) TUNING ( decreases the frequencies.
Notes:
• When you hold and release CONTROL 3 (or TUNING 9 on the
remote control) or CONTROL 2 (or TUNING ( on the remote
control), the frequency keeps changing until a certain station is
tuned in.
• When a station of sufficient signal strength is tuned in, the TUNED
indicator lights up on the display.
• When an FM stereo program is received, the STEREO indicator
also lights up.
17
FM/AM
E
AUTO MUTING
VOLUME
MHz
CONTROL
AUTO MUTING
VOLUME
CONTROL
TUNED STEREO AUTO MUTING
VOLUME
MHz

Using Preset Tuning

Once a station is assigned to a channel number, the station can be
quickly tuned. You can preset up to 30 FM and 15 AM stations.
7
To store the preset stations
Before you start, remember...
There is a time limit in doing the following steps.
If the setting is canceled before you finish, start from step 2 again.
On the front panel ONLY:
1
Tune into the station you want to preset (see
"Tuning into Stations Manually").
• If you want to store the FM reception mode for this station,
select the FM reception mode you want. See "Selecting the
FM Reception Mode" on page 18.
ANALOG
SPK.
L R
Ex. : When selecting the FM band
2
Press MEMORY.
The channel number position starts flashing on the
display for about 5 seconds.
ANALOG
SPK.
L R
3
Press CONTROL 3 (or 2) to select
a channel number while the channel
number position is flashing.
ANALOG
SPK.
L R
4
Press MEMORY again while the selected
channel number is flashing on the
display.
The station is assigned to the selected channel number.
• The selected channel number stops flashing and then the
frequency starts flashing.
ANALOG
SPK.
L R
5
Press CONTROL 3 (or 2) to select another
frequency you want to store while the frequency
is flashing on the display.
6 2 5
Repeat steps to
stations you want.
To erase a stored preset station
Storing a new station on a used channel number erases the
previously stored one.
TUNED STEREO AUTO MUTING
VOLUME
MHz
MEMORY
TUNED STEREO AUTO MUTING
VOLUME
MHz
CONTROL
TUNED STEREO AUTO MUTING
VOLUME
MHz
MEMORY
TUNED STEREO AUTO MUTING
VOLUME
MHz
until you store all the