Table of Contents
Advertisement
Pickup Truck antenna Cable Routing Procedure
Figure 14 shows how the antenna cable should be routed from the antenna to your
SIRIUS radio in a pickup truck.
Follow these detailed cable installation instructions:
1.
Use a plastic putty knife or similar tool to lift the rubber molding around the wind-
shield and tuck the antenna cable underneath it.
2.
Continue tucking the cable underneath the windshield molding around the wind-
shield to the lowest corner.
3.
At the lowest corner of the windshield, route the cable out of the windshield
molding and into the rubber weather stripping around the door opening. Lift the
2. Continue Tucking Cable
Under Molding To
Bottom of Windshield
3. Route Cable Out of Molding
and Into Weatherstripping
Around Door Opening.
Continue to Bottom of
Door Opening.
4. Bring Cable out from
Weatherstripping and
Route Under Carpet.
figure 14
figure 14
1. Route Cable
Under Rubber
Molding Around
Windshield
5. Bring Cable Out to
SIRIUS Radio
Location
[
Installation
]
2
Advertisement
Table of Contents
