Searching A Disc (Only For The Cd Player) - JVC RX-668VBK Instructions Manual

Searching a Disc (Only for the CD player)

Search a disc by its performer:
1. Press TEXT DISPLAY while "CD" is selected as
the source.
The Disc Information screen appears on the TV.
2. Press % / fi to move
to "SEARCH," then
press OSD SET.
The DISC SEARCH screen
appears .
3. Press % / fi to move
to "PERFORMER",
then press OSD SET.
The PERFORMER SEARCH
screen appears.
4. Press % / fi / @ / # to move
first character of the performer you want to
search, then press OSD SET.
To correct the incorrect entry, press % / fi / @ / # to move
in front of the correct character, then press OSD SET.
Note:
Symbols such as @, # or $ cannot be available for search.
5. Press OSD SET again.
Disc search starts, then the
SEARCH RESULT screen,
showing the performers,
appears.
6. On the SEARCH RESULT screen, you can do the
following:
• Changing the indication of the disc information: Press % /
fi to move to a searched disc, then press @ / #. Each time
you press @ / #, the disc information alternates between its
performer and its disc title.
• Going to the Disc Information screen (see page 26): Press %
/ fi to move
to a searched disc, then press OSD SET.
• Showing unseen disc information (if more than 5 discs are
listed as a result of the search): Press % / fi until they
appears.
• Going back to the PERFORMER SEARCH screen: Press
OSD EXIT.
Search a disc by its disc title:
1. Press TEXT DISPLAY while "CD" is selected as
2. Press % / fi to move
3. Press % / fi to move
4. Press % / fi / @ / # to move
in front of the
5. Press OSD SET again.
6. On the SEARCH RESULT screen, you can do the
the source.
The Disc Information screen appears on the TV.
to "SEARCH," then
press OSD SET.
The DISC SEARCH screen
appears.
to "DISC TITLE",
then press OSD SET.
The DISC TITLE SEARCH
screen appears.
first character of the disc title you want to search,
then press OSD SET.
To correct the incorrect entry, press % / fi / @ / # to move
in front of the correct character, then press OSD SET.
Note:
Symbols such as @, # or $ cannot be available for search.
Disc search starts, then the
SEARCH RESULT screen,
showing the disc titles,
appears.
following:
• Changing the indication of the disc information: Press % /
fi to move to a searched disc, then press @ / #. Each time
you press @ / #, the disc information alternates between its
disc title and its performer.
• Going to the Disc Information screen (see page 26): Press
% / fi to move
to a searched disc, then press OSD SET.
• Showing unseen disc information (if more than 5 discs are
listed as a result of the search): Press % / fi until they
appears.
• Going back to the DISC TITLE SEARCH screen: Press
OSD EXIT.
in front of the
27