Do you have a question about the E32W13A-AU and is the answer not in the manual?
Questions and answers
Jenni
May 26, 2025
Model E32W13A blue screen with No Signal on screen.Turn on at least 5 times, get a picture when the tv is warmed-up. Tried other antennae with still the same problem.Tried reset when picture on, not asked for pin. No change
1 comments:
Mr. Anderson
May 26, 2025
A blue screen with "No Signal" on a SONIQ E32W13A TV may be caused by the antenna cable not being properly connected. To resolve this, ensure the antenna cable is securely connected to the TV. If the issue continues, try changing channels to confirm if the symptom is still present.
This answer is automatically generated
PETER J WYKES
February 22, 2025
There is no signal from the Aeriel
1 comments:
Mr. Anderson
February 22, 2025
There is no specific mention of aerial signal issues in the provided information. However, general troubleshooting steps for no signal issues may include checking the AV cables for disconnection, ensuring the correct input source is selected, and verifying the antenna connection.
Page 1
Instruction Manual HOTLINE AUSTRALIA : 1300 765 663 NEW ZEALAND : 0800 100 236 E32W13A- 32" HD LED LCDTV www.soniq.com.au MD121225-01 Printed in China www.soniq.com.au Printed in China...
Table of Contents Safety Instruction IMPORTANT SAFETY INSTRUCTIONS IP Terms and Conditions Table of Contents ......................... Safety Instruction...………....................WARNING Introduction……………………....................Introduction ……..……....................• TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE AN EXTENSION CORD, Package Contents……...................... RECEPTACLE OR OTHER OUTLET.
Safety Instruction Safety Instruction 1. Read instructions-All the safety and operating instructions should be read before the appliance is operated. Warning 2. Retain instructions-The safety and operating instructions should be retained for future reference. High voltages are used in the operation of this product. 3.
• SONIQ is not liable for incidental damages (such as profit loss or interruption in business, modification or erasure of record data, etc.) caused by use or inability to use of product. • SONIQ is not liable for any damage caused by neglect of the instructions described in the Quick Reference Cleaning Cloth owner’s manual.
Main Unit Control Main Unit Control Front Panel Rear Panel Name Description Flashes red when the unit is powered on; Power Indicator Lights up red when the unit is in standby mode. Receives the signal from the remote control. Do not put any Remote Control objects in front of the window in order not to hinder the Sensor Window...
Connection and setup Connection and setup Connecting the Power Cord Connecting with an HDMI to HDMI cable Connect the HDMI output terminal of your HDMI device to the HDMI input terminal on the unit using an Connect the power cord directly to the wall outlet. HDMI cable.
Many video sources can only output Composite video signals, for example,VCRs, camcorders and Video game. Composite (AV) video cable Video game Connecting OPTICAL Signal SONIQ does not supply these cables Connecting Antenna Optical input DIGITAL Multi-family Dwellings/Apartments AUDIO OUT...
Remote Control Remote Control Remote Control Key Functions Using the Remote control When using the remote control, aim it at remote control sensor window with the unit. If there is an object between the remote control and the signal remote control sensor window on the unit, the remote may not operate.
Menu Operation Guide Menu Operation Guide Source Selection Schedule: Press yellow key to browse the program information saved in the schedule list, and press yellow key or exit to return. Input Soure Schedule List 09:33 25th Dec Delete Time Date Programme Title Channel Name 10:00...
Menu Operation Guide Menu Operation Guide Programme Edit CHANNEL MENU Press MENU button to enter the CHANNEL page as follows: Press button to select Programme Edit, then press “OK” button to enter sub-menu. Programme Edit CHANNEL CHANNEL 7 7Digital 1. Press Red button to delete the current channel. 70 7 HD Digital 2.
Menu Operation Guide Menu Operation Guide PICTURE MENU TIME MENU Press MENU to display the main menu. 1. Press MENU button to bring up the main menu. to enter TIME page, it will highlight the first option. 2. Then press to enter PICTURE page, it will highlight the first option, press “OK”...
Menu Operation Guide Menu Operation Guide OPTION MENU PVR File System Press MENU button to display the main menu. PVR function is only available for DTV, includes Record, Timeshift and Playback functions. Record Press to enter OPTION page, it will highlight the first option. includes in time record and preserve record.
Page 13
Menu Operation Guide Menu Operation Guide Then Press OK button to start format the disk, then a warning with All data will be lost” will be displayed to “ PVR Recorder Schedule remind the user to choose Start or EXIT. Press yellow button on the remote control to display schedule list.
Page 14
OSD Menu Operation Menu Operation Guide Menu Operation Guide When highlighting the option you select, picture can be previewed and information of the picture will appear. MUSIC Menu Press ◄/► button to select the file you want in the file selecting menu, then press button to display the picture.
Page 15
Menu Operation Guide OSD Menu Operation Menu Operation Guide Menu Operation Guide MOVIE Menu TEXT Menu Press button to select MOVIE in the main menu, then press OK button to enter. Press button to select TEXT in the main menu, then press OK button to enter. Press EXIT button to quit the menu.
Troubleshooting and Advice OSD Menu Operation Troubleshooting and Advice Before calling a service center, Try the following steps to diagnose the problem. Antenna TV unit Problem Suggested Action • The reception may be weak. The picture is not sharp or Problem Suggested Action •...
Need help?
Do you have a question about the E32W13A-AU and is the answer not in the manual?
Questions and answers
Model E32W13A blue screen with No Signal on screen.Turn on at least 5 times, get a picture when the tv is warmed-up. Tried other antennae with still the same problem.Tried reset when picture on, not asked for pin. No change
A blue screen with "No Signal" on a SONIQ E32W13A TV may be caused by the antenna cable not being properly connected. To resolve this, ensure the antenna cable is securely connected to the TV. If the issue continues, try changing channels to confirm if the symptom is still present.
This answer is automatically generated
There is no signal from the Aeriel
There is no specific mention of aerial signal issues in the provided information. However, general troubleshooting steps for no signal issues may include checking the AV cables for disconnection, ensuring the correct input source is selected, and verifying the antenna connection.
This answer is automatically generated