Lubrication Recommendations - Polaris Trail Boss 2007 Owner's Manual

Lubrication Recommendations

Check and lubricate all components at the intervals outlined in the
Periodic Maintenance Chart beginning on page 60. Items not listed in
the chart should be lubricated at the General Lubrication interval.
NOTE:
Lubrication Chart Key
More often under severe use, such as wet or dusty conditions
"
Polaris Premium All Season Grease or grease conforming to NLG
L
No. 2, such as Conoco Superlube M or Mobilegrease Special
Item
4-Cycle Engine
Brakes
Drive chain(s)
Transmission
(1) Ball Joint
(2) Swing Arm
Bushings
(3) Axle Housing
Downloaded from www.Manualslib.com
MAINTENANCE AND LUBRICATION
The a-arms and lower control arms are lubricated at the
factory, and no additional lubrication will be needed.
However, if these components are subjected to severe use,
grease zerks have been provided for additional lubrication at
the user's discretion.
Lube
Polaris Premium 4 Synthetic 0W40
DOT 4 fluid only
O-ring chain lube or SAE 80/90
Polaris Premium AGL Synthetic
Gearcase Lube
L Grease
"
L Grease
"
L Grease
"
(1)
manuals search engine
Add to proper level on dip-
stick.
Maintain level between fill
lines. See page 33.
Lubricate as often as re-
quired and before each ride
in wet conditions
See Page 66.
Locate fitting on back side of
struts and grease with
grease gun.
Locate fittings on swing arm
and grease with grease gun.
Locate fittings on swing arm
and grease with grease gun.
(3)
Method
(2)
63