Table Of Contents - Panasonic Lumix DMC-TZ20EE Service Manual

TABLE OF CONTENTS

1 Safety Precautions -----------------------------------------------3
1.1. General Guidelines ----------------------------------------3
1.2. Leakage Current Cold Check ---------------------------3
1.3. Leakage Current Hot Check (See Figure 1)---------3
1.4. How to Discharge the Capacitor on Flash
P.C.B.----------------------------------------------------------4
2 Warning --------------------------------------------------------------5
2.1. Prevention of Electrostatic Discharge (ESD)
to Electrostatic Sensitive (ES) Devices ---------------5
2.2. How to Recycle the Lithium Ion Battery (U.S.
Only)-----------------------------------------------------------5
2.3. Caution for AC Cord (For EB/GC/GH/SG) -----------6
2.4. How to Replace the Lithium Battery-------------------7
3 Service Navigation------------------------------------------------9
3.1. Introduction --------------------------------------------------9
3.2. Important Notice 1:(Other than U.S.A. and
Canadian Market) -----------------------------------------9
3.3. About VENUS FHD (IC6001) < Located on
the Main P.C.B. >-------------------------------------------9
3.4. General Description About Lead Free Solder
(PbF) -------------------------------------------------------- 10
3.5. How to Define the Model Suffix (NTSC or PAL
model)------------------------------------------------------- 11
4 Specifications ---------------------------------------------------- 16
5 Location of Controls and Components------------------ 18
6 Service Mode ----------------------------------------------------- 20
6.1. Error Code Memory Function ------------------------- 20
6.2. ICS (Indication of additional Camera Settings
when picture was taken) function -------------------- 24
7 Troubleshooting Guide---------------------------------------- 26
7.1. Checking Method of GPS failure (Except:
ZS10GK) --------------------------------------------------- 26
8 Service Fixture & Tools --------------------------------------- 28
8.1. Service Fixture and Tools ------------------------------ 28
8.2. When Replacing the Main P.C.B. -------------------- 28
8.3. Service Position ------------------------------------------ 29
9 Disassembly and Assembly Instructions --------------- 30
9.1. Disassembly Flow Chart-------------------------------- 30
9.2. P.C.B. Location ------------------------------------------- 30
9.3. Disassembly Procedure -------------------------------- 31
9.4. Lens Disassembly Procedure ------------------------- 39
9.5. Assembly Procedure for Lens ------------------------ 43
9.6. Removal of the C-MOS Unit--------------------------- 47
9.7. Removal of the Zoom Motor Unit -------------------- 47
9.8. Removal of the Focus Motor Unit -------------------- 48
9.9. The Application of Grease Method ------------------ 48
10 Measurements and Adjustments -------------------------- 49
10.1. Introduction ------------------------------------------------ 49
10.2. Before Disassembling the unit ------------------------ 49
10.3. Details of Electrical Adjustment----------------------- 51
10.4. After Adjustment------------------------------------------ 55
11 Maintenance ------------------------------------------------------ 56
PAGE
11.1. Cleaning Lens, Viewfinder and LCD Panel ------- 56
2
PAGE