Advertisement
Model DFG-RSA Configurable Load Cell Adapter
4 USING THE SOFTWARE
When software installation has been completed, plug the DFG-RSA adapter into the indicator, and
connect a USB or RS-232 cable between the indicator and the PC.
4.1 General Menus
File
Close – Click to exit the program.
Help
User's Guide – Click to open the user's guide PDF document (Adobe Reader is required and is
downloadable from the Adobe website).
About
Click to display general software information, including the version number.
4.2 COM Port Settings
Use this screen to configure the PC's COM port to which the indicator is connected.
COM Port
Select the appropriate COM port from the dropdown list. Clicking Refresh updates the list with all
installed ports. The COM port associated with the indicator can be identified under the Ports sub-section
of Device Manager in Windows.
Baud Rate
Select the baud rate of the serial port. The default setting is 9600 baud. Be sure to configure the baud
rate to match that of the indicator.
User's Guide
6
Advertisement
