Advertisement
Enter the desired MIDI operation channel using the buttons 0 through 9.
After selecting the MIDI operation channel, press the ENTER button. This saves
the MIDI operational channel in memory and returns the unit to Performance
Mode.
The EPP400 comes factory set to MIDI channel 01.
NOTE: The EPP400's patch numbers range from 000 through 127. When the
EPP400 receives a MIDI Program Change message with program ID 00, it loads
patch number 000. This is contrary to most other MIDI equipment whose patch
numbers range from 1 through 128. When these equipment receive a MIDI
Program Change message with program ID 00, they load patch number 1.
Specifications
1. Effects Loops:
Loops 1 & 2
Loops 3, 4 & 5
2. Input Impedance:
Inputs 1 & 2
Receive (loops 1 through 5)
Sub Receive (loops 3 through 5)
3. Output Impedance:
Outputs 1 & 2
SUB Output
Send (loops 1 through 5)
4. Maximum Input Level
5. Equivalent Input Noise
6. MIDI:
Program Number
MIDI Channel
7. Dimensions
8. Weight
9. Power Requirements:
120 Volts AC
220 – 240 Volts AC (50 / 60 Hz)
Send / Receive
Send / Receive / Sub Receive
500 kohms
500 kohms
500 kohms
Less then 1 kohms
Less then 1 kohms
Less then 1 kohms
+18 dBv
-94 dBv (1HF-A Input Shorted)
0 through 127
1 through 16
19" (W) x 10½" (D) x 1¾" (H)
482mm (W) x 265mm (D) x 44mm (H)
7.5 lbs, 3.4 kg
16W
18W
14
Advertisement
