Infinity Minuette L-MPS Theater Pac Owner's Manual page 4

L-MPS HORIZ. MOUNTING DIRECTLY ON WALL
(Rear View)
Slide Speaker Down
Onto Wood Screws
FIGURE 6. For horizontal mounting of the L-MPS speaker
directly on a wall, fasten the wood screws (not included) to a
1
desired wall stud, leaving a
and the wall. Rotate the L-MPS speaker horizontally, align the
keyholes on the rear of the speaker with the wood screws, and
slide speaker down.
4
Wood Screws
(fasten to
wall stud)
⁄ " clearance between the screw head
8
L-MPS VERT. MOUNTING WITH WALL BRACKET
(Rear View)
SPEAKER
MOUNTING BRACKET
ON SPEAKER
Slide Speaker With Bracket
Down Onto Wood Screws
FIGURE 7. For vertical mounting of the L-MPS speaker on a wall
using the enclosed bracket, fasten the bracket (as shown) with
wood screws (not included) to a desired wall stud. Leave a
clearance between the screw head and the wall. Then remove the
bracket and firmly attach it to the back of the speaker using the
enclosed screws. Finally, align the bracket's keyholes with the
wood screws in the wall, and slide the speaker (with bracket) down.
NOTE: The above illustration shows the L-MPS speaker being
mounted with a downward tilt. Other orientations are possible by
rotating the mounting bracket before fastening it to the speaker.
(3) Screws
(fasten to
speaker)
MOUNTING
BRACKET
Wood Screws
(fasten to
wall stud)
1
⁄ "
8