Dodge 1997 Neon WIRING DIAGRAMS Owner's Manual page 160

8W - 52 - 6
DESCRIPTION AND OPERATION (Continued)
Circuit L60 supplies voltage to the right front turn
signal/hazard lamp. The L60 circuit splices to the
instrument cluster to power the right indicator lamp.
Circuit L61 supplies voltage to the left front turn
signal/hazard lamp. The L61 circuit splices to the
instrument cluster to power the left indicator lamp.
Circuit L62 supplies voltage to the right rear turn
signal/hazard flasher/stop lamp.
Circuit L63 supplies voltage to the left rear turn
signal/hazard/flasher/stop lamp.
GROUND CIRCUITS
Circuit Z3 provides ground for the instrument clus-
ter indicator lamps. The termination point for circuit
Z3 is the instrument panel left center support.
Circuit Z1 provides ground for all the turn signal/
hazard lamps, although the it has different ground-
ing points for each circuit. Circuit Z2 provides the
ground path for the combination flashing unit.
HELPFUL INFORMATION
• For the left front turn signal/hazard flasher
lamp the Z1 circuit grounding point is the left side of
the radiator closure panel.
8W - 52 TURN SIGNALS
• For the right front turn signal/hazard flasher
lamp the Z1 circuit grounding point is in the right
fender side shield.
• For the left rear turn signal/hazard flasher/stop
lamp the Z1 circuit grounding point is in the left rear
wheel well.
• For the right rear turn signal/hazard flasher/
stop lamp the Z1 circuit grounding point is in the
right rear wheel well.
• Circuit Z1 also supplies ground for the head-
lamps, parking lamps, rear license plate lamp,
back-up lamps and side marker lamps.
• The grounding point for circuit Z2 is the instru-
ment panel right center support. Circuit Z2 supplies
ground for the combination flashing unit.
PL