Panasonic WH-TD20E3E5 Service Manual page 4

1. Installation work.
Three people are required to carry out the installation work. The weight of Tank Unit might cause injury if carried by one person.
2. Do not install Tank Unit at place where leakage of flammable gas may occur. In case gas leaks and accumulates at surrounding of the
Tank unit, it may cause fire.
3. Carry out drainage piping as mentioned in installation instructions. If drainage is not perfect, water leakage may happen and may cause
damage to properties of the user.
4. Select an installation location where it is accessible for maintenance.
5. Do not install this appliance in a laundry room or other high humidity location. This condition will cause rust and damage to the Tank
unit.
6. Make sure the power supply cord does not contact with hot part (i.e. water piping). High temperature may cause insulator of power
supply cord damage hence electrical shock or fire.
7. After installation or servicing, it is obliged to verify correct operation of the Tank Unit. Check the connection points for water leakage. If leakage
occurs, it will cause damage to other properties.
8. Ensure the correct polarity is maintained throughout all wiring. Otherwise, it will cause electrical shock or fire.
CAUTION
4