Table of Contents
Advertisement
To remove the speaker grilles
The speaker grilles are removable as illustrated below:
Holes
To remove the speaker grille, insert your fingers at the top
of the speaker grille, then pull towards you. Also pull the
bottom towards you.
To attach the speaker grille, put the projections of the
speaker grille into the holes of the speaker.
Caution on installation
This unit is compact but high powered, so it has a built-
in cooling fan which operates when the internal heat
rises due to continuous use and/or high volume level.
If you want to place speakers or any equipment on the
sides of the unit, leave a space of at least 1 cm between
the main unit and each of them to obtain sufficient
cooling effect.
Projections
Speaker grille
– 8 –
Connecting External Equipment
You can connect another equipment which can be used as a
playback device.
When you connect and use the equipment, refer also to its
manual supplied.
• DO NOT connect other equipment while the
power is on.
• DO NOT plug in any equipment until all
connections are complete.
To connect external equipment
Be sure that the plugs of the audio cords and the jacks on
the rear of the unit are color-coded: White plugs and jacks
are for left audio signals, and red ones for right audio
signals.
External equipment
Right
Left
R
L
To AUX/DVD jacks
SPEAKERS
R
L
R
L
CAUTION:
SPEAKER IMPEDANCE 4~16Ω
Advertisement
Table of Contents
