Spy On A Bird Network Camera Quick Manual page 5

Note: if no camera details are displayed, try clicking "Refresh". Select the camera you
wish to connect to and click "Open". This will then open up the camera homepage in a
new browser window, as shown in Fig 3.1
3. Running the camera wizard
A. Now that you have successfully set up the camera in wired mode, you can access
the camera on your local network by:
Either selecting the camera in the setup utility and clicking "Open" (as you have just
done in Step 2D)
or by typing in the camera's IP address (as displayed in Camera Setup Fig 2.2)
directly into your Internet Browser's address bar. For example, if your camera's IP
address is 192.168.168.100, enter "http://192.168.168.100" and you will see the
camera Homepage screen below.
Fig 3.1
Note: Depending on your setup, your IP address may change from time to time. If you
ever need to re-check your IP address use the Setup Utility (fig2.2)
B. Click on "Enter" and in the verification box enter "admin" (in lowercase) in the user
name field and "admin" in the password field and click ok.
Note: If you are trying to view the camera for the first time, Windows may prompt you to
install an "ActiveX Control". Click on the bar that appears at the top of the window and
click "Install" and follow the on-screen instructions. You will only need to install this
4