Before You Begin
Broadband connection required at point of setup (minimum 128kb/s upload
recommended). The following Quick Installation Guide is intended for users setting up
with a router. Please refer to the User Manual on the Setup CD-ROM for instructions if
you do not have a router.
Warning
Keep the camera away from water. If the camera is wet, power off immediately
Keep the camera away from direct sunlight
Do not place the camera next to heat sources, such as heaters or ovens
Do not disassemble the camera
Do not place the camera in high humidity environments
Only use with the original power adapter. Do not use power adapters from other
devices as they may damage the camera
This camera is for indoor installation only (unless operated with the outdoor
enclosure kit)
Check Your PC System
Your PC (Personal Computer) and the network must meet the following technical
specifications for the Camera to work properly:
Processor: Intel Pentium III, 800MHz or Higher (Pentium IV, 2 GHz or Higher
recommended)
RAM: 256 MB or more
Color Monitor: Suggest at least 800x600 and the latest driver for the display adapter
OS (Operating System): Windows 2000/XP/VISTA/7
Web Browser: Internet Explorer Version 5.5 or above
Interface: 10/100 Mbps Ethernet card, wireless router for wireless connectivity
1
Need help?
Do you have a question about the Network Camera and is the answer not in the manual?
Questions and answers