Part Assembly Diagram - Thane Housewares FlavorWave Oven Turbo User Manual

CLEANING YOUR OVEN
ALWAYS UNPLUG THE OVEN BEFORE CLEANING
LIGHT CLEANING
• Unplug oven and let cool.
• Use a sponge or dishcloth with a mild dish washing detergent and warm water to
wipe glass bowl clean.
• Rinse well to remove all detergent.
• Note : Never immerse the lid in any liquid.
NORMAL CLEANING
• Unplug oven and let cool.
• Wipe lid and fan housing using a dishcloth or damp sponge with a mild dish
washing detergent.
• Do not clean with steel wool pads or abrasive materials.
• Wash wire racks in mild dish washing detergent and water.
• Clean metal parts using a sponge or dishcloth with a mild dish washing
detergent, then wipe clean. If scrubbing is necessary, use a nylon or polyester mesh pad.
DO NOT USE THE OVEN UNTIL IT'S COMPLETELY DRY
SELF CLEANING OF GLASS BOWL
• Add tap water until the water reaches the mark level on the bowl holder in fig.4.
• Add one squeeze of mild dish washing detergent.
• Replace lid and plug in.
• Set heat control to "wash" and set timer for 10 minutes.
(The hot air circulation creates the turbo action that helps
release stubborn residue from bowl.)
• After cleaning rinse in warm water to remove all soap residue.
DISHWASHER-SAFE GLASS BOWL
The glass bowl and wire racks may also be washed in the
dishwasher.
However, never wash the lid in a dishwasher or immerse it in liquid. Remove the
glass bowl from its stand before dish washing.
REMEMBER...
• Unplug oven before cleaning the lid
• Let oven cool before washing
• Never immerse lid in water
• Do not add water above the line marked on the glass bowl
when self cleaning
• Do not let fan assembly get wet
DRYING THE OVEN
• The oven must always be kept dry after cleaning to avoid
moisture in the lid.
• Make sure the oven is unplugged, leave lid slightly open and
allow the oven to dry thoroughly as illustrated in fig
TO AVOID BREAKAGE ALLOW THE GLASS BOWL TO
COOL BEFORE POURING WATER OR SELF CLEANING
Fig.4
Fig.5
.5.
10
OPTIONAL ACCESSORIES CONTINUED
Browning Tray Is a special accessory for your
Flavorwave Turbo Oven.
It serves the purpose of
browning, or making food crisp
by oxidizing.
Extender Ring The Flavorwave Turbo Extender
Ring makes it possible to cook
larger turkeys, chickens, hams
etc. Insert the Extender Ring
between the glass bowl and the
lid and increase the height of the
Flavorwave Turbo bowl by an
additional 3" (9 cm)
Roast Rack
When roasting a whole turkey/chicken you may use the Roast Rack.
Place the Roast rack on the Low rack and then position a whole turkey/chicken.
Note: Must be used with the extender ring"

PART ASSEMBLY DIAGRAM

2
1
Place the bowl holder on Place the glass bowl
a firm surface. inside the bowl holder.
4 5
Place the lid on the glass Assembly is now
bowl. complete
Breakfast Tray is ideal for preparing your favorite
breakfast. Just place pieces of
bread, bacon and eggs on the
rack and cook at the same time
Quick Skillet Place the Quick Skillet onto the
with non-stick
metal skillet holder, put the
coating
FlavorWave Oven Turbo lid with
halogen heater on top and you
are ready to prepare your quick
skillet dishes. Please refer to the
"How to operate the FlavorWave
Oven Turbo Instructions" to set
temperature and time.
3
Place wire rack(s) inside
the glass bowl.
7