Sony HVR-MRC1 Service Manual page 58

1-10. Clearing of Accumulated CF Detection Count
Note: The following shows a case that uses the batch file of En-
glish version.
For Japanese version, use "CFDET.bat".
Procedures
1. Double-click "CFDET_E.bat" copied to the PC.
2. The command prompt starts up.
• To execute, press the [ENTER] key of PC. The clearing of accu-
mulated CF detection count will be executed.
• To cancel, click "x" mark at the upper right of the command
prompt window to close the command prompt window.
3. When the clearing of accumulated CF detection count finished,
the following message will be displayed in the command
prompt window.
4. Press the [ENTER] key of PC to close the command prompt
window.
HVR-MRC1
Fig. 6-1-34
Fig. 6-1-35
6-10E