Panasonic SA-AK240P Service Manual page 20

SA-AK240P / SA-AK240PC
Error Code Diagnosis Contents Description of error
ITOP UD assembly
IUDS UD assembly
HOME Cam gear/gear
assembly abnormal
LOAD Tray drive assembly
abnormal
PDRV Cam gear/gear
assembly abnormal
UDU UD base asssembly
abnormal
UDD UD base asssembly
abnormal
UD1 UD base asssembly
abnormal
F1NG Fail - safe mode. (For
open/close tray
unit(s))
UD Rack does not
move to front direction.
This lead to UD base
not raise to top position.
After TOP SW is
detected, UD rack does
not move into tray 1
position.
Cam gear does not
move to "HOME"
position under following
conditions
1. After tray is load to
"PLAY" position.
2. After tray is unload
to "STOCK"
position.
Tray unit does not move
from "STOCK" to
"PLAY" position
Cam gear does not
move from "HOME" to
"PLAY" drive position.
UD Base assembly
does not move upwards
from tray 5 to tray 2
UD Base assembly
does not move
downwards from tray 1
to tray 5.
UD Base assembly
does not move to tray 1.
When the tray open
operation is performed,
it fails to open. It will
automatically close all
trays after the time-out
by the microprocessor.
During this time when it
fails, the error code will
appear.
20
Automatic FL Display Remarks
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.