Auto Standby - JVC GVT0142-001A Instructions Manual

Setting the Various Timer (continued)
How the daily timer works
Once the daily timer has been set, the timer
indicator and timer number indicator (1/2/3) are lit
on the display window. Daily timer turns on the
system at the same time everyday until the timer
setting is canceled manually or another daily timer
is activated.
When the on-time comes:
The system turns on, tunes in to the last received
station or start playback the loaded disc with the
volume level set to the preset level.
About one hour after the playback starts, the
system stops it, and turns off (stand by)
automatically.
• The timer setting remains in memory until you
can change it.
• Without canceling the daily timer, you can
change the source or adjust the volume after the
daily timer starts playback.
1
Press CLOCK/TIMER repeatedly
to show "DAILY1."
• Each time you press the button, the clock
setting changes as follows:
Source
indication
Clock adjust
ON PM 6:00
DAILY3
2
Press cursor 3/2 to adjust the
hour of the timer-on time, then
press SET.
3
Press cursor 3/2 to adjust the
minute of the timer-on time,
then press SET.
4
Repeat step 2 and 3 to set the
timer-off time.
5
Press cursor 3/2 to select the
playback source, then SET.
• Each time you press the button, the clock
setting changes as follows:
AUX TUNER FM
DISC TUNER AM
• When selecting the tuner, press cursor 3/2
to select a preset channel.
DAILY1
ON AM 6:00
DAILY2
ON PM 12:00
6
Press cursor 3/2 to adjust the
volume level, then SET.
7
Turn off the system.
To turn off the timer setting
1
Press CLOCK/TIMER repeatedly
to select the timer setting.
2
Press CANCEL to turn off the
selected setting.
• Pressing SET activates the timer setting
again.

Auto Standby

If there is no operation for 3 minutes while the disc
is stopped, the power will be automatically turned
off.
Press A.STANDBY during playback
or while the disc is stopped, or no
disc is loaded ("NO DISC" appears).
The A.STANDBY indicator lights on the display
window on the main unit.
When a stopped state is entered (after playback is
finished, for example), the A.STANDBY indicator
starts blinking.
This means that the power will be turned off
automatically if there is no operation for 3 minutes.
And, 10 seconds before the power is turned off,
"A.STANDBY" starts flashing.
Releasing Auto Standby
Press A.STANDBY.
"A.STANDBY" will be turned off on the display
window on the main unit.
NOTE
When the source is FM, AM or AUX, Auto Standby
does not work.
Convenient functions
35