Table of Contents
Advertisement
Programing the Track Playing Order
—Program Play
You can arrange the order in which the tracks play before you
start playing. You can program up to 100 tracks.
On the remote control ONLY:
1
Load discs into the 5-CD Changer.
• If the current playing source is not "CD," press
3/8 CD, then 7 before going to the next step.
2
Press PLAY MODE repeatedly until
"CD PROGRAM" appears on the
display.
The PRGM indicator also lights on the display.
PRGM indicator
1
2
3
4
5
CD
PRGM
• Each time you press the button, play mode changes as
follows:
CD PROGRAM
(Program Play)
Standard display
(Continuous Play)
3
Press one of the disc number
buttons (CD 1 – CD 5) to select the
disc number you want to play.
Program step number
1
2
3
4
5
CD
PRGM
Disc number
4
Press the number buttons to
select a track from the disc
selected in the previous step.
• For how to use the number buttons,
see "To go to another track directly
using the number buttons" on the
previous page.
Track number
1
2
3
4
5
CD
PRGM
PLAY
MODE
CD RANDOM
(Random Play)
CD 1
CD 2
CD 3
CD 4
CD 5
1
2
3
4
5
6
7
8
9
10
+10
5
Program other tracks you want.
• To program tracks from the same disc, repeat step 4 .
• To program tracks from a different disc, repeat steps 3
and 4 .
6
Press 3/8 CD.
The tracks are played in the order you have
programed.
To stop during play, press 7.
To exit from the Program Play mode, before or
after play, press PLAY MODE once or twice so
that the unit enters another disc playback mode
(Random Play or Continuous Play).
The PRGM indicator goes off.
• Turning off the unit or changing the source also cancels
Program Play and changes the disc playback mode to
Continuous Play.
To check the program contents
Before playing, you can check the
program contents by pressing ¢ or
4.
• ¢: Shows the programed tracks in the programed order.
• 4: Shows them in the reverse order.
• Pressing 4 first time after you have programed
shows the first track in the program.
To modify the program
Before playing, you can erase the last programed
track by pressing CANCEL.
Each time you press the button, the last
programed track is erased from the program.
To add tracks to the program before playing, simply select
disc numbers and track numbers you want to add on steps 3
and 4 .
In the Program Play mode, you cannot open the disc trays.
If you try to program a 101st track
"MEMORY FULL" will appear on the display.
When "NO PROGRAM" appears on the display
• You are trying to program a track from an empty tray, or a track
number that does not exist on the disc.
• You are selecting the disc that the unit has not read yet.
Continued
3/8
CD
PLAY
MODE
CANCEL
18
Advertisement
Table of Contents
