Table of Contents
Advertisement
Basic and Common Operations
Adjusting the Volume
You can adjust the volume level only while the unit is turned
on. The volume level can be adjusted between
"VOLUME MIN" and "VOLUME 1" – "VOLUME 40
(VOLUME MAX)."
On the remote control:
To increase the volume, press VOLUME +.
To decrease the volume, press VOLUME –.
• When you press and hold either button, you
can change the volume level continuously.
On the unit:
To increase the volume, turn the
VOLUME + / – control clockwise.
To decrease the volume, turn the
VOLUME + / – control counterclockwise.
For private listening
Connect a pair of headphones to the PHONES jack. No sound
comes out of the speakers. Be sure to turn down the volume before
connecting or putting on the headphones.
DO NOT turn off (standby) the unit with the volume
set to an extremely high level; Otherwise, the
sudden blast of sound can damage your hearing,
speakers and/or headphones when you turn on the
unit or start playing any source.
REMEMBER you cannot adjust the volume level
while the unit is in standby mode.
11
(continued)
Reinforcing the Bass Sound
The richness and fullness of the bass sound is clearly
maintained regardless of how low you set the volume
—Active Hyper Bass Pro.
• This function also affects the sound from headphones.
To get the effect, press AHB PRO repeatedly so
that "AHB BASS1" or "AHB BASS2" appears on
the display.
The
AHB PRO
display.
VOLUME
VOLUME
1
CD
• Each time you press the button, the Active Hyper Bass Pro
mode changes as follows:
AHB BASS1
• "AHB BASS2" is more effective than "AHB BASS1."
To cancel the effect, press AHB PRO repeatedly until
"BASS OFF" appears on the display.
The
AHB PRO
indicator also lights up on the
AHB PRO
AHB PRO
2
3
4
5
AHB BASS2
BASS OFF
(canceled)
indicator goes off.
AHB PRO
indicator
Advertisement
Table of Contents
