Samsung Galaxy S4 User Manual page 222

Note: The status LED begins to blink solid red to indicate
it has begun the start up process.
LED Color/Patterns Description
Red - Solid Indicates the AllShare Cast Hub is
booting or processing.
Red - Blinking Indicates the AllShare Cast Hub is in
standby mode (ready for connection).
Blue - Solid Indicates the AllShare Cast Hub is
ready to be connected with a new
device.
2. Connect your TV to the AllShare Cast Hub via an HDMI
cable (A-to-A cable) as shown above.
3. Change the source input on your TV to match the input
port used by the incoming HDMI cable.
Note: The television screen should now display an on-screen
tutorial showing you how to configure your device's
AllShare Cast Hub and device settings.
216
DRAFT
Internal Use Only
To activate Screen Mirroring on your device:
1. From the Home screen, press
Settings
Mirroring.
2. If not already on, tap the Screen Mirroring and then
move the slider to the right to turn it on. The slider
color indicates the activation status.
Pairing AllShare Cast Hub
To pair your device and Hub for the 1st time:
1. Locate the AllShare Hub (dongle) name displayed at the
bottom of the TV (showing the tutorial).
Ex: Name: Dongle - XXXXXX.
2. Access your device's AllShare Cast screen and locate
the same hub/dongle name in the list.
• Tap Scan if your AllShare Cast Hub (dongle) does not appear in
the list.
3. Verify your AllShare Cast Hub is on (blinking red LED)
and the on-screen tutorial is displaying on the
connected TV.
4. Verify the previous
displayed.
and then tap
(Connections tab) Screen
(Wi-Fi Direct Active) is