JVC GNT0065-025A Instructions Manual page 7

To connect the AM loop antenna
1 Hold
2 Insert
AM loop antenna (supplied)
Turn it until the best reception is obtained.
2 Insert
1 Hold
3 Release
To assemble the AM loop antenna
For better FM/AM reception
Disconnect the supplied FM antenna,
and connect to an outdoor FM antenna
using a 75 wire with coaxial type
connector (IEC or DIN45325).
Vinyl-covered wire (not supplied)
3 Release
Outdoor FM antenna
(not supplied)
Extend it horizontally.
NOTES
• DO NOT connect more than one speaker
to each terminal.
• DO NOT allow the conductor of the
speaker cords to be in touch with the
metallic parts of the System.
AM loop antenna
Keep it connected.
4