(5) Installing
the Drag Link Assembly
(Standard accessories for EPTO and EPO types)
Incorrect or unstable installation of the Drag Link assembly can result in
accidents while riding the boat or breakage of the hull
Installation
of the Drag Link
Assembly
by your
dealer is highly
recommended.
Note:
Depending
on the steering
cable manufacture,
spacers
(optical)
may
be required.
@ Connect the Drag Link rod to the tip of the steering cable.
Tighten the rod using the nut wth nylon-stopper,
making sure the rod can
swing freely.
@Connect
the other tip of the rod to the steering bracket with a bolt, first
applying a collar and washer. The bolt head must face downward.
Note:
Apply grease in required places.