Introduction To Connections; Experiencing Hd Images; Types Of Connection; One Key Function - Sharp LC-32LE551U Operation Manual

Introduction to Connections

Experiencing HD Images

In HDTV without an HD source is just an ordinary TV.To enjoy HD images on the TV, you should get HD
programming from the following:
• Over-the-air broadcasting via HD quality antenna
• HD cable/satellite subscription
• HD compatible external equipment.
NOTE
• For information on updating to HD programming, ask your cable/satellite service provider.

Types of Connection

For connecting the TV to external equipment, use commercially available cables.
• The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products.
■ Connecting to video equipment or PC
Image quality differs depending on the terminal used. To enjoy clearer images, check the output terminals of
your external equipment and use its appropriate terminals for higher quality images.
Image Terminal
Quality on the TV
HD
HDMI-certified cable
Quality
1 2 MHL
RCA audio to Ø 3.5 mm stereo minijack cable
COMPONENT / VIDEO
Y/V Pb/Cb Pr/Cr AUDIO
L R
DVI-HDMI conversion cable
1 2 MHL
Component video cable
COMPONENT / VIDEO
Y/V Pb/Cb Pr/Cr
AUDIO
L R
Standard COMPONENT / VIDEO
Quality
Y/V Pb/Cb Pr/Cr
AUDIO
L R
■ Connecting to audio equipment
Terminal on the TV
Optical fiber cable
AUDIO OUT
L R OPTICAL
AUDIO OUT
L R OPTICAL
Terminal on external
Cable
equipment
AUDIO
DVI OUT
Audio cable
AV cable
Terminal on external
Cable
equipment
OPTICAL
DIGITAL AUDIO INPUT
Audio cable
ANALOG AUDIO IN
Displaying an External Equipment Image
To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV.
NOTE
INPUT
• The button is only available on LC-48LE551U control panel.
Example
TV
AV IN
Component
HDMI-1
HDMI-2(Side)
Pages
10, 11

One Key Function

Besides powering the TV on and off ("Turning On/Off the Power" on page 12), you can also use POWER to
directly access the INPUT menu, select the channel, and adjust the volume level.
Pages
10, 11
1
Press POWER on the control panel to turn on the TV.
2
Press POWER again to display the ONE KEY menu.
3
Do one of the following:
• To change the input source, press POWER repeatedly to select the
desired input source. Then press and hold POWER to confirm the
Page 10
selection.
• To change the channel, press POWER repeatedly to highlight Channel.
Then press and hold POWER to display the Channel Up/Channel
Page 10
Down submenu and press POWER repeatedly to toggle the selection.
Once selected, press and hold POWER to select the desired channel.
• To adjust the volume level, press POWER repeatedly to highlight Volume.
Then press and hold POWER to display the Volume Up/Volume Down
submenu and press POWER repeatedly to toggle the selection.
Once selected, press and hold POWER to adjust the volume level at your preference.
NOTE
Page 11
• For One Key function, the channel selection option is only available when the input source is set to "TV".
• The OSD illustrations of the terminals are for explanation purposes and may vary slightly from the actual products.
v For 48" TV model (LC-48LE551U) is equipped with 3 HDMI(HDMI-1, HDMI-2 and HDMI-3(Side).
Page 11
v For 32" & 39" TV models (LC-32LE551U/ LC-32LE451U/ LC-39LE551U) are equipped with 2 HDMI(HDMI-1 and
HDMI-2(Side).
1
Press INPUT.
• The INPUT list screen displays.
Input 2
Press a/b to select the input source.
• You can also select the input source by pressing
INPUT. Each time INPUT is pressed, the input source
toggles.
TV AV IN Component HDMI-1
HDMI-2(Side)
• An image from the selected source automatically
displays.
• If the corresponding input is not plugged in, you cannot
change the input. Be sure to connect the equipment
beforehand.
Input
TV
AV IN
Component
HDMI-1
HDMI-2(Side)
Channel
Volume 1
*Press the button to change options.
9
*Press and hold the button to select.