Table of Contents
Advertisement
5. Installation:
NexStar GX External 3.5" HDD Enclosure:
5.1. Hardware Installation:
Preparing the hard drive:
1) Set the hard drive jumpers to MASTER or SINGLE DRIVE ONLY. Please refer
to the documentation included with your hard drive for information on
how to accomplish this.
Preparing the NexStar GX:
1) Remove the lid of the NexStar GX
2) Unscrew and remove the heatsink tray.
Installing the hard drive into the NexStar GX:
1) Align the heatsink tray on the hard drive and attach with the four screws
provided. Try to establish good contact between the drive and the tray.
Installation
5
Advertisement
Table of Contents
