Basic Cd Operations - JVC CA-UXL36V Instructions Manual

To stop playing, press 7.
To remove disc, press 0 for the corresponding disc tray.
• If the CD cannot be read correctly (because it is scratched, for
example) or an unreadable CD-R or CD-RW is inserted
Playback will not start.
• If no CD is inserted
"NO DISC" appears on the display.
DO NOT try to open or close the CD tray by hand
as it will be damaged.

Basic CD Operations

While playing a CD, you can do the following operations.
To stop playing for a moment
Press CD 3/8.
While pausing, the elapsed playing time
flashes on the display.
To resume playing, press CD 3/8 again.
To go to another track
Press ¢ NEXT or PREV 4
repeatedly.
• ¢ NEXT :
Skips to the beginning of the
next or succeeding tracks.
• PREV 4 :
Goes back to the beginning of
the current or previous tracks.
To go to another track directly using the number
buttons
On the remote control ONLY:
Pressing the number button(s) allows you to start playing the
track number you want.
Ex.: For track number 5, press 5.
For track number 15, press
+10, then 5.
For track number 20, press
+10, then 10.
For track number 32, press
+10, +10, +10, then 2.
To locate a particular point in a track
During play, press and hold ¢ NEXT
or PREV 4.
• ¢ NEXT : Fast-forwards the tracks.
• PREV 4 : Fast-reverses the
tracks.
– 16 –
SELECT
CD
CD
PREV NEXT
DOWN UP
PREV NEXT
PREV NEXT
DOWN UP
PREV
NEXT